产品导览
OTP GPIO Type MCU Series (High EFT/ESD Level)
产品资讯
- 封装尺寸
联络我们
一般描述
特征
- CPU configuration
- 4Kx13 bits on-chip OTP-ROM
- 144x8 bits on-chip registers (SRAM)
- 8-level stacks for subroutine nesting
- 3 programmable Level Voltage Reset (LVR) : 4.0V, 3.0V, 2.5V
- Less than 1.5 mA at 5V/4MHz
- Typically 15 mA, at 3V/32kHz
- Typically 2 mA, during sleep moden
- I/O port configuration
- 4 bidirectional I/O ports: P5, P6, P7 and P8
- Wake-up port : P6
- 26 I/O pins
- 8 programmable pull-down I/O pins
- 8 programmable pull-high I/O pins
- 8 programmable open-drain I/O pins
- 16 Programmable high sink current I/O pins
- 8 Programmable high drive current I/O pins
- External interrupt : P77, P71
- Operating voltage range:
- OTP version:
Operating voltage range: 2.1V~5.5V (commercial)
Operating voltage range: 2.3V~5.5V (industrial)
- Operating temperature range:
Operating temperature range: 0°C~70°C (commercial)
Operating temperature range: -40°C~85°C (industrial)
- Operating frequency range
- Crystal mode:
DC~16MHz/2 clks @ 4.5V; DC~125ns inst. Cycle @ 4.5V
DC ~ 8MHz/2 clks @ 3V; DC~250ns inst. Cycle @ 3V
- ERC mode:
DC ~ 16MHz/2 clks @ 4.5V; DC~125ns inst. Cycle @ 5V
DC ~ 8MHz/2 clks @ 3V; DC ~ 250ns inst. Cycle @ 3V
- IRC mode:
Oscillation mode: 16MHz, 4 MHz, 1 MHz, 455kHz
Process deviation: Typ ± 3%, Max. ± 5%
Temperature deviation: ± 5% (-40°C~85°C)
Internal RC Frequency Drift Rate Temperature(-40°C~85°C) Voltage(2.1V~5.5V) Process Total 4MHz ±5% ±5% ±4% ±14% 16MHz ±5% ±5% ±4% ±14% 1MHz ±5% ±5% ±4% ±14% 455kHz ±5% ±5% ±4% ±14% All the four main frequencies can be trimmed by programming with four calibrated bits in the ICE220N Simulator. OTP is auto trimmed by ELAN Writer (DWTR)
- Fast set-up time requires only 800ms (VDD:5V,Crystal: 4MHz, C1/C2: 30pF) in HXT2 mode and 10ms inIRC mode (VDD:5V IRC:4MHz)
- Peripheral configuration
- 8-bit real time clock/counter (TCC) with selective signal sources, trigger edges, and overflow interrupt
- One comparator (can act as an OP).(offset voltage is smaller than 10mV)
- Five available interrupts
- TCC overflow interrupt
- Input-port status changed interrupt (wake up from sleep mode)
- Two External interrupts
- Comparator high/low interrupt
- Special Features
- Programmable free running Watchdog Timer
- Two clocks per instruction cycle
- Power-on voltage detector available (1.8 V± 0.1V)
- High EFT immunity (better performance at 4MHz or below
- Power saving Sleep mode
- Selectable Oscillation mode
- Package Type:
- 24-pin skinny DIP 300mil : EM78P220NK24
- 24 pin SOP 300mil : EM78P220NSO24
- 24 pin SSOP 209mil : EM78P220NSS24A
- 28-pin skinny DIP 300mil : EM78P220NK28
- 28 pin SOP 300mil : EM78P220NSO28
- 28 pin SSOP 209mil : EM78P220NSS28
Note: Green products do not contain hazardous .substances.