销售咨询:13554798900
    方案咨询:13923787744

产品导览

OTP GPIO Type MCU Series (High EFT/ESD Level)

EM78P173N

联络我们

一般描述

特征

  • CPU configuration
  • 1Kx13 bits on-chip OTP-ROM
  • 48×8 bits on-chip registers (SRAM, General purpose)
  • 5-level stacks for subroutine nesting
  • 4 programmable level voltage detector LVD : 4.5, 4.0, 3.3, 2.2V
  • 3 programmable level voltage reset LVR : 4.0, 3.5, 2.7V
  • Less than 1.5 mA at 5V/4MHz
  • Typically 15 μA, at 3V/32kHz
  • Typically 1 μA, during Sleep mode
  • I/O port configuration
  • 2 bidirectional I/O ports: P5, P6
  • 12 I/O pins
  • Wake-up port : P6
  • 7 programmable pull-down I/O pins
  • 7 programmable pull-high I/O pins
  • 7 programmable open-drain I/O pins
  • External interrupt with wake-up: P60
  • Operating voltage range:
  • 2.1V~5.5V at 0~70°C (Commercial)
  • 2.3V~5.5V at -40~85°C (Industrial)
  • Operating frequency range (base on 2 clocks): 
  • Crystal mode: 

DC~20MHz/2clks @ 5V

DC~8MHz/2clks @ 3V

DC~4MHz/2clks @ 2.1V

  • ERC mode: 

DC~2 MHz/2clks @ 2.1V

  • IRC mode: 
Internal RC Frequency Drift Rate
Temperature(-40°C~85°C) Voltage(2.1V~5.5V) Process Total
4MHz ±2% ±3% ±2% ±7%
16MHz ±2% ±3% ±2% ±7%
8MHz ±2% ±3% ±2% ±7%
1MHz ±2% ±3% ±2% ±7%
  • Peripheral configuration
  • 8-bit real time clock/counter (TCC) with selective signal sources, trigger edges, and overflow interrupt
  • External interrupt input pin
  • 2/4 clocks per instruction cycle selected by code option
  • Power down (Sleep) mode
  • High EFT immunity 
  • Four available interrupts
  • TCC overflow interrupt
  • Input-port status changed interrupt
  • External interrupt
  • Low voltage detect interrupt
  • Special Features
  • Programmable free running watchdog timer
  • Power-on voltage detector available (1.8~1.9V)
  • Package Type:  
  • 14-pin DIP 300mil : EM78P173ND14
  • 14-pin SOP 150mil : EM78P173NSO14
  • 10-pin MSOP 118mil : EM78P173NMS10

Note: Green products do not contain hazardous .substances.