产品导览
OTP GPIO Type MCU Series
EM78P153B
联络我们
一般描述
特征
- CPU configuration
- 1K x 13 bits on-chip ROM
- 32 x8 bits on-chip registers (SRAM, general purpose)
- 5 level stacks for subroutine nesting
- Less than 1.5 mA at 5V/4MHz
- Typically 15µA, at 3V/32kHz
- Typically 1µA, during Sleep mode
- I/O port configuration
- 2 bidirectional I/O ports: P5,P6
- 12 I/O pins
- Wake-up port: P6
- 6 Programmable pull-down I/O pins
- 7 programmable pull-high I/O pins
- 7 programmable open-drain I/O pins
- External interrupt : P60
- Operating voltage range
- 2.3V~5.5V at 0°C~70°C (Commercial Grade)
- Operating frequency range (base on 2 clocks)
- Crystal mode:
DC ~ 20 MHz / 2clks @ 5V
DC ~ 8 MHz / 2clks @ 3V
DC ~ 4 MHz / 2clks @ 2.3V
The transient point of system frequency between HXT and LXT is 400 kHz.
- ERC mode
DC ~ 2 MHz / 2clks @ 2.1V
- IRC mode:
Oscillation mode : 4 / 8 / 1 MHz and 455kHz Process Deviation: Type: Max. ± 3% Temperature Deviation: ± 2% (0 ~ 70°C)
Internal RC Frequency | Drift Rate | |||
Temperature( 0°C ~70°C ) | Voltage | Process | Total | |
4 MHz | ±1.5% | ±8%@2.3~5.5V | ±2% | ±11.5% |
8 MHz | ±1.5% | ±8%@3.0~5.5V | ±2% | ±11.5% |
1MHz | ±1.5% | ±8%@2.3~5.5V | ±2% | ±11.5% |
455kHz | ±1.5% | ±8%@2.3~5.5V | ±2% | ±11.5% |
- Peripheral configuration
- 8-bit real time clock/counter (TCC) with selective signal sources, trigger edges, and overflow interrupt
- Power on reset and 3 programmable level voltage reset POR: 1.8V (Default), LVR: 4.0, 3.5, 2.7V
- 2 -/ 4 clocks per instruction cycle selected by code option
- Three Available Interrupts:
- TCC overflow interrupt
- Input-port status changed interrupt (wake-up from sleep mode)
- External interrupt
- Special Features
- Programmable free running watchdog timer
- Power saving Sleep mode
- Selectable Oscillation mode
- Programmable prescaler of oscillator set-up time
- Package type:
- 14-pin DIP 300mil : EM78P153BD14
- 14-pin SOP 150mil : EM78P153BSO14
- 10-pin SSOP 150mil : EM78P153BSS10