产品导览
OTP GPIO Type MCU Series (High EFT/ESD Level)
EM78P176N
产品资讯
- 封装尺寸
联络我们
一般描述
特征
- CPU configuration
- 1Kx13 bits on chip ROM
- 48×8 bits on-chip registers (SRAM, General purpose)
- 5-level stacks for subroutine nesting
- 4 programmable level voltage detector LVD : 4.5, 4.0, 3.3, 2.2V
- 3 programmable level voltage reset LVR : 4.0, 3.5, 2.7V
- Less than 1.5mA at 5V/4MHz
- Typically 15 μA, at 3V/32kHz
- Typically 1 μA, during Sleep mode
- I/O port configuration
- 3 bidirectional I/O ports : P5, P6, P7
- 18 I/O pins
- Wake-up port : P6
- 7 Programmable pull-down I/O pins
- 8 programmable pull-high I/O pins
- 8 programmable open-drain I/O pins
- External interrupt with wake-up : P60
- Operating voltage range:
- 2.1V~5.5V at 0~70°C (Commercial)
- 2.3V~5.5V at -40~85°C (Industrial)
- Operating frequency range (base on 2 clocks):
- Crystal mode:
DC~20MHz/2clks @ 5V
DC~8MHz/2clks @ 3V
DC~4MHz/2clks @ 2.1V
- ERC mode:
DC~2 MHz/2clks @ 2.1V
- IRC mode:
Internal RC Frequency Drift Rate Temperature(-40°C~85°C) Voltage(2.1V~5.5V) Process Total 4MHz ±2% ±3% ±2% ±7% 16MHz ±2% ±3% ±2% ±7% 8MHz ±2% ±3% ±2% ±7% 1MHz ±2% ±3% ±2% ±7%
- Peripheral configuration
- 8-bit real time clock/counter (TCC) with selective signal sources, trigger edges, and overflow interrupt
- External interrupt input pin
- 2/4 clocks per instruction cycle selected by code option
- Power down (Sleep) mode
- High EFT immunity
- Four available interrupts
- TCC overflow interrupt
- Input-port status changed interrupt
- External interrupt
- Low voltage detect interrupt
- Special Features
- Programmable free running watchdog timer
- Power-on voltage detector available (1.8~1.9V)
- Selectable Oscillation mode
- Package Type:
- 20-pin SSOP 209mil : EM78P176NSS20J/S
- 20-pin SOP 300mil : EM78P176NSO20J/S
- 18-pin DIP 300mil : EM78P176ND18J/S
- 18-pin SOP 300mil : EM78P176NSO18J/S
- 10-pin SSOP 150mil : EM78P176NSS10J/S
- 10-pin MSOP 118mil : EM78P176NMS10J/S
Note: Green products do not contain hazardous .substances.