产品导览
OTP GPIO Type MCU Series (High EFT/ESD Level)
EM78P156K
产品资讯
- 封装尺寸
联络我们
一般描述
特征
- CPU configuration
- 1k * 13 bits on-chip ROM
- 48 * 8 bits on-chip registers (SRAM, general purpose)
- 5 level stacks for subroutine nesting
- 3 programmable level voltage reset
LVR : 4.0, 3.5, 2.7V- Less than 1.5 mA at 5V / 4MHz
- Typically 15 μA at 3V / 32kHz
- Typically 1 μA during Sleep mode
- I/O port configuration
- 2 bidirectional I/O ports : P5, P6
- 12 I/O pins
- Wake-up port : P6
- 7 Programmable pull-down I/O pins
- 8 programmable pull-high I/O pins
- 8 programmable open-drain I/O pins
- 2 programmable R-option pins
- External interrupt : P60
- Operating voltage range:
- 2.1V ~ 5.5V at 0 ~ 70(C (Commercial)
- 2.3V ~ 5.5V at -40 ~ 85(C (Industrial)
- Operating frequency range(base on 2 clocks)
- Crystal mode:
DC ~ 20MHz / 2clks @ 5V
DC ~ 8MHz / 2clks @ 3V
DC ~ 4MHz / 2clks @ 2.1V- IRC mode:
Internal RC Frequency Drift Rate Temperature
(-40°C~85°C)Voltage Process Total 4MHz ±1% ±3% @ 2.1~5.5V ±2% ±6% 16MHz ±1% ±1% @ 4.0~5.5V ±2% ±4% 8MHz ±1% ±2% @ 3.0~5.5V ±2% ±5% 1MHz ±1% ±3% @ 2.1~5.5V ±2% ±6% - ERC mode: DC ~ 2MHz / 2clks @ 2.1V
- Peripheral configuration
- 8-bit real time clock / counter (TCC) with selective signal sources, trigger edges, and overflow interrupt
- 2 / 4 clocks per instruction cycle selected by code option
- High EFT immunity
- Three available interrupts
- TCC overflow interrupt
- Input-port status changed interrupt (wake-up from sleep mode)
- External interrupt
- Special Features
- Programmable free running watchdog timer
- Power saving sleep mode
- Selectable oscillation mode
- Package Type:
- 18-pin DIP 300mil : EM78P156KD18J
- 18-pin SOP 300mil : EM78P156KSO18J
- 20-pin SSOP 209mil : EM78P156KJSS20J
Note: These are all Green products which do not contain hazardous substances.