-
4K*13 bits on-chip OTP-ROM
-
144 bytes general purpose register
-
128 bytes on-chip data RAM
-
272 bytes SRAM
-
8-level stacks for subroutine nesting
-
Typically, 12 bidirectional tri-state I/O ports.
-
13 bidirectional tri-state I/O ports shared with LCD segment output pin.
-
Up to 25 bidirectional tri-state I/O ports
-
Operating Voltage and Temperature Range
-
Commercial: 1.9V ~ 3.6 V (at 0°C ~ 70°C)
-
Industrial: 2.1V ~ 3.6 V (at -40°C ~ 85°C)
-
Normal mode : The CPU is operated on main oscillator frequency (Fm)
-
Green mode : The CPU is operated on sub-oscillator frequency(Fs) and main oscillator(Fm) is stopped.
-
Idle mode: CPU idle, LCD display remains working
-
Sleep mode: The whole chip stops working
-
Input port wake-up function (Port 6, Port 8):Works on Idle and Sleep mode.
-
Operation speed: DC ~ 10 MHz clock input.
-
Dual clock operation
-
High frequency oscillator can select among Crystal, RC, or PLL(phase lock loop)
-
Low frequency oscillator can select between Crystal or RC modeIRC mode:
-
8-bit real Time Clock/Counter(TCC)
-
One infrared transmitter/PWM generator function
-
Four sets of 8 bits auto reload down-count timer can be used as interrupt sources
-
Counter 1:independent down-count timer
-
Counter 2:High Pulse Width Timer(HPWT), and Low Pulse Width Timer (LPWT) shared with IR function.
-
Programmable free running on-chip Watchdog Timer(WDT). This function can operate in Normal, Green and Idle mode.
-
Input port wake-up function(Port 6, Port 8)
Works under Idle and Sleep modes.
-
Power-on reset and 3 programmable Level Voltage Reset
POR: 1.8V (Default), LVR :2.7V, 2.4V, 2.1V
-
Eight Interrupt Sources: Three External and Five Internal
-
Internal interrupt source: TCC; Counters 1, 2; High/Low pulse width timer.
-
External interrupt source : INT0, INT1 and Pin change wake-up (Port 6 and Port 8)
-
Common driver pins: 4
-
Segment driver pins: 17
-
LCD Bias: 1/3, 1/2 bias
-
LCD Duty: 1/4, 1/3, 1/2 duty
-
Dice 44-pin EM78470NH
-
LQFP 44-pin EM78470NL44 (10mm*10mm)
|