-
1K x 13 bits on-chip ROM
-
48 x 8 bits on-chip registers (SRAM)
-
8-level stacks for subroutine nesting
-
4 programmable level voltage detector
-
(LVD) : 4.5V, 4.0V, 3.3V, 2.2V
-
3 programmable level voltage reset
-
(LVR) : 4.0V, 3.5V, 2.7V
-
Less than 1.5 mA at 5V/4MHz
-
Typically 15 uA, at 3V/32kHz
-
Typically 2 uA, during Sleep mode
-
1 bidirectional I/O ports
-
Wake-up port : P5
-
7 Programmable pull-down I/O pins
-
7 programmable pull-high I/O pins
-
7 programmable open-drain I/O pins
-
External interrupt : P52
-
Operating voltage: 2.1V~5.5V (Commercial)
-
Operating temperature: 0C ~70C (Commercial)
-
Operating frequency range
DC~16MHz/2clks @4.5V
DC~8MHz/2clks @ 3V
DC~4MHz/2clks @ 2.1V
DC~16 MHz/2clks @ 4.5V
DC~12 MHz/2clks @ 4V
DC~4 MHz/2clks @ 2.1V
Oscillation mode : 4 MHz, 8 MHz, 16 MHz, 455kHz
Internal RC Frequency
|
Drift Rate
|
Temperature( 0C ~70C )
|
Voltage(2.3V~2.5V)
|
Process
|
Total
|
4 MHz
|
∮3%
|
∮5%
|
∮3%
|
∮11%
|
8 MHz
|
∮3%
|
∮5%
|
∮3%
|
∮11%
|
16 MHz
|
∮3%
|
∮5%
|
∮3%
|
∮11%
|
455kHz
|
∮3%
|
∮5%
|
∮3%
|
∮11%
|
All the four main frequencies can be trimmed by programming with four calibrated bits in the ICE143 Simulator. OTP is auto trimmed by ELAN Writer.
-
8-bit real time clock/counter (TCC) with selective signal sources, trigger edges, and overflow interrupt
-
7-channel Analog-to-Digital Converter with 10-bit resolution in Vref mode
-
Two Pulse Width Modulation (PWM) with 8-bit resolution, each provides 8-bit real time clock / counter function and supports 16-bit cascaded mode from these two independent ones
-
One pair of comparators(Offset voltage : 5mV , max offset voltage : 10mV)
-
Power-down (Sleep) mode
-
High EFT immunity
-
Seven available interrupts:
-
TCC overflow interrupt
-
Input-port status changed interrupt (wake-up from sleep mode)
-
External interrupt
-
ADC completion interrupt
-
PWM period match completion
-
Comparators status change interrupt
-
Low voltage detector interrupt
-
Programmable free running Watchdog Timer
-
Two clocks per instruction cycle
-
Watchdog timer 16.5ms ∮ 30% in Vdd = 5V at 25C (WDTPS=1 in Option pin)
-
Watchdog timer 18ms ∮ 30% in Vdd = 3V at 25C (WDTPS=1 in Option pin)
-
Watchdog timer 4.2ms ∮ 30% in Vdd = 5V at 25C (WDTPS=0 in Option pin)
-
Watchdog timer 4.5ms ∮ 30% in Vdd = 3V at 25C (WDTPS=0 in Option pin)
-
10-pin MSOP 118 mil : EM78P141MS10
Note: Green products do not contain hazardous substances.
|