-
14-lead packages : EM78P153S
-
Operating voltage range : 2.3V~5.5V
-
Available in temperature range: 0C~70C
-
Operating frequency range (base on 2 clocks):
* Crystal mode: DC~20MHz at 5V, DC~8MHz at 3V, DC~4MHz at 2.3V.
* ERC mode: DC~4MHz at 5V, DC~4MHz at 3V, DC~4MHz at 2.3V.
-
Low power consumption:
* less then 1.5 Ma at 5V/4MHz
* typical of 15 µA, at 3V/32KHz
* typical of 1µA, during the sleep mode
-
1024 x 13 bits on chip ROM
-
Built-in calibrated IRC oscillators (8MHz, 4MHz, 1MHz, 455KHz )
-
Programmable prescaler of oscillator set-up time
-
One security register to prevent the code in the OTP memory from intruding
-
One configuration register to match the userˇs requirements
-
32⊙ 8 bits on chip registers (SRAM, general purpose register)
-
2 bi-directional I/O ports
-
5 level stacks for subroutine nesting
-
8-bit real time clock/counter (TCC) with selective signal sources and trigger edges,
-
and with overflow interrupt
-
Power down mode (SLEEP mode)
-
Three available interruptions
* TCC overflow interrupt
* Input-port status changed interrupt (wake up from the sleep mode)
* External interrupt
-
Programmable free running watchdog timer
-
7 programmable pull-high I/O pins
-
7 programmable open-drain I/O pins
-
6 programmable pull-down I/O pins
-
Two clocks per instruction cycle
-
Package type: 14 pins SOP, DIP
* 14 pin DIP 300mil: EM78P153SP
* 14 pin SOP 150mil: EM78P153SN
-
The transient point of system frequency between HXT and LXT is around 400KHz.
|