-
Operating voltage range : 2.3V~5.5V
-
Operating temperature range: 0C~70C
-
Operating frequency rang (base on 2 clocks ):
* Crystal mode: DC~20MHz at 5V, DC~8MHz at 3V, DC~4MHz at 2.3V.
* ERC mode: DC~4MHz at 5V, DC~4MHz at 3V, DC~4MHz at 2.3V.
-
Low power consumption:
* Less then 2.0 mA at 5V/4MHz
* Typically 15 µA at 3V/32KHz
* Typically 1 µA during sleep mode
-
1K x 13 bits on chip ROM
-
One configuration register to accommodate userˇs requirements
-
48⊙ 8 bits on chip registers (SRAM, general purpose register)
-
2 bi-directional I/O ports
-
5 level stacks for subroutine nesting
-
8-bit real time clock/counter (TCC) with selective signal sources, trigger edges, and
overflow interrupt
-
Two clocks per instruction cycle
-
Power down (SLEEP) mode
-
Three available interruptions
* TCC overflow interrupt
* Input-port status changed interrupt (wake up from sleep mode)
* External interrupt
-
Programmable free running watchdog timer
-
8 programmable pull-high pins
-
7 programmable pull-down pins
-
8 programmable open-drain pins
-
2 programmable R-option pins
-
Package types:
* 18 pin DIP 300mil : EM78156E
* 18 pin SOP(SOIC) 300mil : EM78156E
* 20 pin SSOP 209mil : EM78156E
* 20 pin SSOP 209mil : EM78156E
-
99.9% single instruction cycle commands
-
The transient point of system frequency between HXT and LXT is around 400KHz
|